Layanan journal yang disediakan oleh Perpustakaan Universitas Gunadarma
| Judul Artikel | : | INTERAKSI BAHAN BAKAR U3Sb-AI DENGAN KELONGSONG AIMg2 PADA ELEMEN BAKAR SILISIDA TMU 2,96 gU/cm3 PASCA IRADIASI |
|---|---|---|
| Judul Terbitan | : | Urania Jurnal Ilmiah Daur Bahan Bakar Nuklir |
| ISSN | : | 0852-4777 |
| Bahasa | : | IND |
| Tempat Terbit | : | Batan |
| Tahun | : | 0000 |
| Volume | : | Vol. 21 Issue 1 0000 |
| Penerbit | : | Pusat Teknologi Bahan Bakar Nuklir (PBTN), BATAN |
| Frekuensi Penerbitan | : | |
| Penulis | : | Aslina Br.Ginting, Maman Kartaman, Supardjo |
| Abstraksi | : | INTERACTION OF U3Si2-AI FUEL ELEMENT WITH AIMg2 CLADDING ON POST IRRADIA TlON WITH LOADING OF URANIUM 2.96 gU/cm3. Interaction of U3SirAI fuel element with AIMg2 cladding on post irradiation of 2. 96 qtl/cm? loading of uranium (TMU) of U3SirAI fuel elements plate (PEB) has been analyzed. The purpose of this research is to study the changes of microstructure of nuclear fuel elements during iradiation in reactor core. Understanding on interaction of U3SirAI fuel meat with AIMg2 cladding onpre and post irradiation needed to study the influence of radiation on fuel elements plate. PEB U3SirAI with 2.96 qil/cm? by size 10 x 10 mm were heated in DTA (Differential Thermal Analysis) furnace with temperature variation at 450, 550, 650, 900 and 1350°C to perform pre irradiation test. Post irradiation samples were cut by size 2 x 10 mm as many as three samples taken from bottom, middle, and top of PEB in hotcell. The metallography preparation for each pieces of pre and post irradiation samples of U3SirAI fuel elements plate with 2.96 gU/cm3 weredone through steps mounting, grinding, polishing, and etching. Scanning Electron Microscope (SEM-EDS) were used to observe the pre irradiation microstructure of fuel elements U3SirAI with AIMg2 cladding interaction, while the post irradiation microstructure were observed by optical microscope in hot cell. The result show the interaction of U3Si2 with AI matrix or AIMg2 cladding in pre irradiation PEB U3Si2-Aloccurred agglomeration formed new compouds of U(AI,Si)x and UAlx formation. Agglomeration formation on heated pre irradiation samples were bigger while heating temperature increased. The post irradiation sampels shoed the oxide layer were formed outside the AIMg2 cladding and the inner side of caldding that contact to the fuel meat formed/ight-grey U(AI, Si)xlayer at 1-3 micron of thickness. |
| Kata Kunci | : | Interaction; U3SirAlfuel elements plate; AIMg2 cladding; pre and post irradiation |
| Lokasi | : | P10 |
| Terakreditasi | : | belum |